MFF

These robust pumps have stainless steel 316L investment cast pump casings and can be equipped with open, semi-open or vortex investment cast impellers in stainless steel 316L or similar. The pumps have a large clearance between the impeller and the pump casing and as a result they can handle solids and fibres without any risk of clogging.Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.

Properties

Property
Max. flow	750 m3/h
Differential head	30 m wc
Max. Inlet pressure	12 bar
Viscosity	500 cP
Max. temperature	140 °C
Impeller type	Open or vortex
Max. free passage	50 mm
Max. drive power	250 kW
Speed	1500/1800 rpm
Available frequency	50 / 60 Hz
Materials wetted parts	Stainless steel 316L or similar
Mechanical seal configuration	Single bellow, single balanced, quench, double, pressurized barrier
Available O-ring materials	EPDM, FKM, FEP-FKM
Connections	BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges
Surface finish	Industrial finish: welds are not hand polished. Final surface treatment: electropolished
Certificates	1935/2004 EC. FDA. EAC. ATEX

Description

These robust pumps have stainless steel 316L investment cast pump casings and can be equipped with open, semi-open or vortex investment cast impellers in stainless steel 316L or similar. The pumps have a large clearance between the impeller and the pump casing and as a result they can handle solids and fibres without any risk of clogging.Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.
Downloads
- Packo_MFF_US_EN_Datasheet.pdf
- Packo_Industrial_Brochure_EN.pdf

Pump series MFF

Investment cast stainless steel pump casings
Large clearance between impeller and pump casing
Large seal cavity to guarantee liquid circulation around the seal
Monobloc execution with std. IEC motors

Application areas

The Packo pumps of the series MFF are used in a wide range of industries and applications.

You can find them in just about all industries such as vegetable industry, water treatment and textile industry as well as in e.g. biogas, biodiesel and bioethanol applications.

Typically the pumps are transferring liquids with fibres and solids coming from washing or blanching vegetables, potato waste, circulation of liquids on digesters, etc.