1. Verder Liquids/
  2. Pumps/
  3. Packo/
  4. General Industrial Series/
  5. IMXL

IMXL

The Packo vertical sump pump series IMXL are designed for installation in a sump or tank, having only the casing and impeller submerged. The pumps have a length of 1500 mm having a shaft supported by a slide bearing in the liquid.These robust pumps have stainless steel 316L pressed or investment cast pump casings and can be equipped with open, semi-open, closed impellers and vortex impellers. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.Available in ICP, MCP, IFF and MFF version with open, semi-open, closed or vortex impellers.

  • Properties

    Property
    Max. flow 300 m3/h
    Differential head 28 m wc
    Max. Inlet pressure -
    Viscosity 1000 cP
    Max. temperature 120 °C
    Impeller type Open. semi-open or closed 
    Max. pump length 1500 mm
    Max. free passage 45 mm
    Max. drive power 22 kW
    Speed 1500 rpm
    Available frequency 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration No mechanical seals, with slide bearings
    Available O-ring materials EPDM, FKM, FEP-FKM, silicone
    Connections Hygienic fittings. BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges 
    Surface finish Industrial, welds not hand polished, electropolished
    Certificates 1935/2004 EC. FDA. EAC. ATEX 

  • Description

    The Packo vertical sump pump series IMXL are designed for installation in a sump or tank, having only the casing and impeller submerged. The pumps have a length of 1500 mm having a shaft supported by a slide bearing in the liquid.These robust pumps have stainless steel 316L pressed or investment cast pump casings and can be equipped with open, semi-open, closed impellers and vortex impellers. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.Available in ICP, MCP, IFF and MFF version with open, semi-open, closed or vortex impellers.

  • Downloads

Pump series IMXL

  1. Use of standard IEC motors
  2. Tapered shaft, fully machined
  3. High strength column support pipe. Rigidly maintains alignment between motor and casing. Protects pump shaft.
  4. Executed with slide bearing in carbon / stainless steel or Silicon carbide / silicon carbide materials. No dry running allowed, additional flushing pipes for oil or water are available as an option.
  5. Optional: stainless steel base plate and outlet pipe

Application areas

The Packo submersible cantilever pump series IMXL are used in a wide range of industries and applications such as metal finishing industry, industrial spray washers, water treatment, galvanizing and coating industry, chemical industry, etc.

They are handling degreasing, pickling & phosphatizing liquids, slurries, hot oils, process and industrial wastes, corrosive liquids, condensate, etc.

Your benefits

  • Pump length up to 1500 mm in ‘monobloc’ design
  • Easy and robust construction
  • Easy maintenance
  • Electropolished: higher resistance against corrosion and sticky liquids
  • Available with different impellers

Performance Curves

@1500 RPM