• Properties

    Property
    Max. flow 176 GPM
    Max suction lift 246 feet
    Max. Inlet pressure 72.5 PSI
    Viscosity 300 cPs
    Max. temperature 284 °F
    Impeller type Star impeller with straight or profiled blades 
    Max Airhandling capacity 13.21 GPM
    Max suction depth 8,5m
    Max. drive power 20.12 hp
    Speed 1500/1800 rpm
    Available frequency 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration Diverse types single mechanical seal
    Available material O-ring EPDM, FKM, FFKM
    Connections DIN11851. SMS. RJT. DIN11864-1. DIN11864-2 
    Surface finish Electropolished
    Certificates 1935/2004 EC. FDA. EAC. USP 
  • Description

    Both the pump casing, the impellers and the lantern piece with bearing support of this self-priming pump consist of electrolytically polished precision casting in stainless steel 316L. This results in a robust, reliable pump with a very fine surface structure.

Pump series MSCP

  1. Monobloc version with standard IEC motors (4-pole)
  2. Pump outlet on seal chamber. The liquid flushes the mechanical shaft seal, ensuring perfect cleaning of the seal chamber.
  3. No dead space around impeller mounting screw.
  4. When stopped, sufficient liquid remains in the pump to be able to start up again.
  5. Connection ring on the outside of the blades. Pump casing is cleaned better than with an impeller attached to the outside and yet there is no resonance of the blades as with open impellers.
  6. Impeller with profiled blades (optional) results in exceptional suction and air handling capacity and in a low

 

Application areas

This self-priming side channel pump is used in various applications where air must be pumped in against a high back pressure in the discharge line.

The MSCP has exceptional suction power and air handling capacity. This means it can completely empty the suction line, even with foaming and slightly more viscous liquids.

It is often used for unloading trucks and pumping in high silos.

Your benefits

  • Exceptional suction power and air handling capacity thanks to impeller with profiled blades (optional)
  • Sucks the suction line completely empty
  • Also suitable for foaming liquids and liquids that are slightly more viscous
  • Hygienic design
  • Electrolytically polished: easy to clean
  • Standard engine and mechanical seal are the best guarantee for reasonable spare part prices

Performance Curves

@1500 RPM