MFP3

The Packo pumps of the MFP3 series are used on the most demanding hygienic applications in almost all industries such as dairies, breweries, beverage industry, distilleries, etc. These robust pumps have stainless steel 316L cast pump casings and closed investment cast impellers, constructed in 316L or duplex materials. Thanks to its crevice-free design and electropolishing as a final surface treatment, the MFP3 pump series are the ideal reliable component for your production process.

Properties

Property
Max. flow	7920 GPM
Max suction lift	246 feet
Max. Inlet pressure	174 PSI
Viscosity	500 cPs
Max. temperature	284 °F
Impeller type	Closed with back vanes and balancing holes
Max. free passage	1.06 inch
Max. drive power	335.26 hp
Speed	3000 / 3600 rpm
Available frequency	50 / 60 Hz
Materials wetted parts	Stainless steel 316L or similar
Mechanical seal configuration	Single, quench, double
Available material O-ring	EPDM, FKM, FEP-FKM, FFKM, Silicone
Connections	Hygienic fittings
Surface finish	Hygienic quality, internal welds hand polished + electropolished
Certificates	1935/2004 EC. FDA. USP. ATEX. MEI. EAC

Description

The Packo pumps of the MFP3 series are used on the most demanding hygienic applications in almost all industries such as dairies, breweries, beverage industry, distilleries, etc. These robust pumps have stainless steel 316L cast pump casings and closed investment cast impellers, constructed in 316L or duplex materials. Thanks to its crevice-free design and electropolishing as a final surface treatment, the MFP3 pump series are the ideal reliable component for your production process.
Downloads
- Packo_MFP3_US_EN_Datasheet.pdf
- PACKO-FOOD-BROCHURE-EN.pdf

Pump series MFP3

Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
Solid design thanks to investment cast casings and impellers
Large seal cavity to clean mechanical seal properly
Monobloc execution with std. IEC motors