FP2
These pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non-porous and extremely smooth. The pumps have open investment cast impellers, constructed in 316L or duplex materials. Thanks to its crevice-free design and electropolishing as a final surface treatment, the FP2 pump series are perfectly cleanable, resulting in a reliable component for your food production process.
-
Properties
Property Max. flow 484 GPM Max suction lift 721.6 feet Max. Inlet pressure depending on pump type up to 20 PSI Viscosity 1000 cPs Max. temperature 284 °F Impeller type Open Max. free passage 0.87 inch Max. drive power 120.69 hp Speed 3000 / 3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single bellow, sterile, quench, double Available material O-ring EPDM, FKM, FEP-FKM, FFKM, Silicone Connections Hygienic fittings Surface finish Hygienic quality, internal welds hand polished + electropolished (casing 0.8 μm - impeller 3.2 μm) Certificates 1935/2004 EC. FDA. USP. ATEX. MEI. EAC -
Description
These pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non-porous and extremely smooth. The pumps have open investment cast impellers, constructed in 316L or duplex materials. Thanks to its crevice-free design and electropolishing as a final surface treatment, the FP2 pump series are perfectly cleanable, resulting in a reliable component for your food production process.
- Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
- Pressed stainless steel in 2B quality plate, extremely smooth
- Large seal cavity to clean mechanical seal properly
- Monobloc execution with std. IEC motors
Application areas
The Packo process pumps of the FP2 series are used in the most demanding hygienic applications in almost all industries such as dairies, breweries, beverage industry, distilleries, etc.
They are the ideal solution for filtration applications, pasteurisation, evaporating systems, yeast propagation and for CIP cleaning systems as well.
Typical applications include filtration of beer, wine and fruit juices as well as pumping yeast, whey and curd.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: perfectly cleanable
- Easy construction and easy maintenance: less downtime
- Standard components
- Easy to install
- 2 mechanical seal diameters for entire range
- Robust construction
Assembly and disassembly videos
Assembly video - configuration with bellow seal
Assembly video - configuration with sterile seal
Assembly video - configuration with quench and bellow seal
Assembly video - configuration with double seal
Disassembly video - replacement of bellow seal
