PRP2
The pumps of the PRP2 series are perfectly cleanable 3A certified air handling pumps and are mainly used to pump a mixture of liquid and air. These perfectly cleanable pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non porous and extremely smooth. The pumps have fully machined open impellers constructed in 1.4435 material. Thanks to its crevice-free design and electropolishing as a final surface treatment, the PRP2 pump series are perfectly cleanable, resulting in a reliable component into your production process.
-
Properties
Property Max. flow 352 GPM Max suction lift 246 feet Max. Inlet pressure 188.5 PSI Viscosity 10 cPs Max. temperature 284 °F Impeller type Open Max. free passage 0.87 inch Max. drive power 29.5 hp Speed 3000 / 3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L for casing and backplate, 1.4435 for the impellers, duplex 1.4462 for metallic parts of the seal and impeller screw Available materials O-ring EPDM, FKM, FEP-FKM, FFKM, Silicone Mechanical seal configuration Single, quench, double Connections Sterile connections Surface finish Pharmaceutical quality, roughness value < 0,4 µm for wetted parts, electropolished and fully certified. Certificates 3A. 1935/2004 EC. FDA. USP. ATEX. EAC -
Description
The pumps of the PRP2 series are perfectly cleanable 3A certified air handling pumps and are mainly used to pump a mixture of liquid and air. These perfectly cleanable pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non porous and extremely smooth. The pumps have fully machined open impellers constructed in 1.4435 material. Thanks to its crevice-free design and electropolishing as a final surface treatment, the PRP2 pump series are perfectly cleanable, resulting in a reliable component into your production process.
- Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
- Unique air handling design with cleanable air separator
- By-pass to casing taking care about air evacuation
- Fully drainable
- Monobloc execution with std. IEC motors
Application areas
Thanks to its unique air handling design based on a standard centrifugal pump, the PRP2 series are particularly suitable as CIP return pump!
Your benefits
- High pump efficiency lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: perfectly cleanable
- Easy & robust construction and easy maintenance: Less downtime
- Limited noise level
- 1 mechanical seal diameter for the entire range
- Fully certified (roughness value, FDA, USP, 3.1 for wetted parts, certificate of conformity, etc.)
- Suitable for SIP
- Parts in contact < 0,4 μm
