NP60
The Packo stainless steel centrifugal pumps of the NP60 series are a low-cost industrial pump used for handling pure as well as slightly contaminated products up to 500 cP. They are often used as process pump for the coloring of textiles, for water treatment but also for handling solvents, alcohols and chemicals.
-
Properties
Property Max. flow 176 GPM Max suction lift 88.56 feet Max. Inlet pressure 43.5 PSI Viscosity 500 cPs Max. temperature 203 °F Impeller type Open Max. free passage 0.59 inch Max. drive power 2.95 hp Speed 3000 / 3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single, quench Available O-ring Materials EPDM, FKM Connections BSP fittings. flanges according to EN1092-1/02. smooth tubes Surface finish Industrial, internal welds not hand polished, electropolished Certificates ATEX. MEI. EAC -
Description
The Packo stainless steel centrifugal pumps of the NP60 series are a low-cost industrial pump used for handling pure as well as slightly contaminated products up to 500 cP. They are often used as process pump for the coloring of textiles, for water treatment but also for handling solvents, alcohols and chemicals.
Pump series NP60
The Packo stainless steel centrifugal pumps of the NP60 series are low cost industrial pumps. They have investment cast open impellers. This series achieves an overall high efficiency, leading to a lower energy consumption for your production process. Thanks to its modular concept it also guarantees an easy maintenance.
- Pressed stainless steel with minimum thickness of 2 mm
- Investment cast open impellers
- Large seal cavity to guarantee liquid circulation around the seal
- Monobloc execution with std. IEC motors
Application areas
The NP60 pumps are mainly used for pure as well as slightly contaminated liquids up to a maximum viscosity of 500 cP.
They are often used as process pump for the washing of textiles, for water treatment, but also for pumping solvents, alcohols and chemicals.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: easy to clean
- Easy construction and easy maintenance: less downtime
- Easy to install
- Solid impellers compared to low-cost spot welded versions