NMS
The Packo multistage pumps from the NMS series are equipped with open investment cast impellers and pump casings. They are the right match for operations at moderate flows and high pressures.
-
Properties
Property Max. flow 220 GPM Max suction lift 705.2 feet Max. Inlet pressure 145 PSI Viscosity 250 cPs Max. temperature 284 °F Impeller type Open Max. free passage 0.55 inch Max. drive power 60.35 hp Speed 3000 / 3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single bellow, single balanced, quench, double Available O-ring materials EPDM, FKM Connections Flanges acc. to EN1092-1/01. Tri-Clamp fittings. etc. Surface finish Industrial finish: welds are not hand polished. Final surface treatment: electropolished Certificates 1935/2004 EC. FDA. ATEX. EAC -
Description
The Packo multistage pumps from the NMS series are equipped with open investment cast impellers and pump casings. They are the right match for operations at moderate flows and high pressures.
- Large seal cavity to guarantee liquid circulation around the seal
- Solid design thanks to investment cast pump casings and impellers
- Open impellers: no axial forces on motor bearings
- Monobloc execution with std. IEC motors
Application areas
For use in food, brew, beverage, pharmaceutical and chemical industries, as transfer and mixing pump for liquid food products, drinks, medicines, lotions, etc.
Typical applications: process pump for plate heat exchangers, pasteurizer systems, filters, filling machines, mixers, deaerators, carbonators and high pressure cleaning systems.
Your benefits
- Ideal for operation at moderate flow rate and high pressures
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy & robust construction and easy maintenance: less downtime
- Standard components
- Easy to install
- Open impellers: longer bearing life
