MCP3

These robust pumps have stainless steel 316L cast pump casings and closed or channel investment cast impellers constructed in duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.

Properties

Property
Max. flow	7920 GPM
Max suction lift	246 feet
Max. Inlet pressure	174 PSI
Viscosity	500 cPs
Max. temperature	284 °F
Impeller type	closed (with back vanes and balancing holes) – optional: channel impellers
Max. free passage	Closed impellers: 27 mm - channel impellers: 41 inch
Max. drive power	335.26 hp
Speed	3000 / 3600 rpm
Available frequency	50 / 60 Hz
Materials wetted parts	Stainless steel 316L or similar
Mechanical seal configuration	Single bellow, single balanced, quench, double, pressurized barrier
Available O-ring materials	EPDM, FKM, FEP-FKM, FFKM
Connections	Flanges according to EN1092-1/01 & 02. ANSI flanges
Surface finish	Industrial finish: welds are not hand polished. Final surface treatment: electropolished
Certificates	1935/2004 EC. FDA. ATEX. MEI. EAC

Description

These robust pumps have stainless steel 316L cast pump casings and closed or channel investment cast impellers constructed in duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.
Downloads
- Packo_MCP3_US_EN_Datasheet.pdf
- Packo_Industrial_Brochure_EN.pdf

Pump series MCP3

Solid design thanks to investment cast pump casings and impellers
Large seal cavity to guarantee liquid circulation around the seal
Monobloc execution with std. IEC motors

Application areas

They are often used as a process pump for polluted water and for CIP cleaning systems, filtration of wine, mash, beer, whey and blanching of vegetables.

Typical liquids: mash, wort, process water and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.