IPP2
The Packo stainless steel pumps of the IPP2 series are pumps made of solid, machined stainless steel 316L and are extremely suitable for high system pressure applications up to 40 bar.
-
Properties
Property Max. flow 484 GPM Max suction lift 360.8 feet Max. Inlet pressure 580 PSI Viscosity 1000 cPs Max. temperature 284 °F Impeller type Open Max. free passage 0.79 inch Max. drive power 60.35 hp Speed 3000 / 3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single balanced, quench, double Available O-ring materials EPDM, FKM, FEP-FKM, FFKM, Silicone Connections Flanges according to EN1092-1/11 PN40. Tri-Clamp fittings. etc. Surface finish Industrial finish: welds are not hand polished. Final surface treatment: electropolished Certificates 1935/2004 EC. FDA. EAC -
Description
The Packo stainless steel pumps of the IPP2 series are pumps made of solid, machined stainless steel 316L and are extremely suitable for high system pressure applications up to 40 bar.
- Solid design made of fully machined stainless steel
- Large seal cavity to guarantee liquid circulation around the seal
- Monobloc execution with std. IEC motors
Application areas
The Packo high pressure pumps of the IPP2 series are used primarily in reverse osmosis (RO) applications for the filtration of, for example, contaminated CIP-water, whey, etc. They are also used as a booster pump in a variety of skids.
You will find them in just about all industries including the dairy industry, breweries, beverage industry as well as in water treatment industry.
Your benefits
- Suitable for system pressure applications up to 40 bar
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy and robust construction and easy maintenance: less downtime
- Standard components
- Easy to install
- 2 seal diameters for entire range
