ICP2
These robust pumps have stainless steel 316L pump housings made from thick cold-rolled plate and have open, cast impellers in stainless steel 316L or duplex materials. The solid construction and electro-polished design make these pumps the reliable component for your production process.
-
Properties
Property Max. flow 484 GPM Max suction lift 721.6 feet Max. Inlet pressure 188.5 PSI Viscosity 1000 cPs Max. temperature 284 °F Impeller type Open Max. free passage 0.87 inch Max. drive power 120.69 hp Speed 3000 / 3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single bellow, single balanced, quench, double, pressurized barrier Available O-ring materials EPDM, FKM, FEP-FKM, FFKM, Silicone Connections BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges. smooth tubes Surface finish Industrial, internal welds not hand polished, electropolished Certificates MEI. ATEX. EAC -
Description
These robust pumps have stainless steel 316L pump housings made from thick cold-rolled plate and have open, cast impellers in stainless steel 316L or duplex materials. The solid construction and electro-polished design make these pumps the reliable component for your production process.
- Pressed stainless steel, pump casing thickness up to 8 mm, back plate up to 20 mm
- Investment cast impellers
- Large seal cavity to guarantee liquid circulation around the seal
- Monobloc execution with std. IEC motors
Application areas
The Packo pumps of the ICP2 series are used in a wide range of industries and applications.
You find them in just about all industries such as the vegetable industry, breweries, water treatment and the textile industry, but also, for example, in applications for biogas, biodiesel and bioethanol.
Typical liquids: blanching water, mash, wort, process water, contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.
Your benefits
- High pump efficiency resulting in low energy consumption
- Low NPSH levels, less risk of cavitation
- Electropolished: high corrosion resistance
- Simple and robust construction and easy maintenance: less downtime
- Easy to install
- Solid impellers compared to cheaper spot-welded versions
- 2 sealing diameters for the whole series
- Standard components