MSCP
Both the pump casing, the impellers, and the lantern piece with bearing support of this self-priming pump are constructed from electrolytically polished precision casting in stainless steel 316L. This leads to a robust, reliable pump with a very fine surface structure.
-
Properties
Property Max. flow 40 m3/h Differential head 75 m wc Max. Inlet pressure 5 bar Viscosity 300 cP Max. temperature 140 °C Impeller type Star impeller with straight or profiled blades Max Airhandling capacity 50 l/min Max suction depth 8,5m Max. drive power 15 kW Speed 1500/1800 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Diverse types single mechanical seal Available material O-ring EPDM, FKM, FFKM Connections DIN11851. SMS. RJT. DIN11864-1. DIN11864-2 Surface finish Electropolished Certificates 1935/2004 EC. FDA. EAC. USP -
Description
Both the pump casing, the impellers, and the lantern piece with bearing support of this self-priming pump are constructed from electrolytically polished precision casting in stainless steel 316L. This leads to a robust, reliable pump with a very fine surface structure.
- Monobloc version with standard IEC motors (4-pole)
- Pump outlet on seal chamber. The liquid flushes the mechanical shaft seal, ensuring perfect cleaning of the seal chamber.
- No dead space around impeller mounting screw.
- When stopped, sufficient liquid remains in the pump to be able to start up again.
- Connection ring on the outside of the blades. Pump casing is cleaned better than with an impeller attached to the outside and yet there is no resonance of the blades as with open impellers.
- Impeller with profiled blades (optional) results in exceptional suction and air handling capacity and in a low
Application areas
This self-priming side channel pump is used in various applications where air must be pumped in against a high back pressure in the discharge line.
The MSCP has exceptional suction power and air handling capacity. This means it can completely empty the suction line, even with foaming and slightly more viscous liquids.
It is often used for unloading trucks and pumping in high silos.
Your benefits
- Exceptional suction power and air handling capacity thanks to impeller with profiled blades (optional)
- Sucks the suction line completely empty
- Also suitable for foaming liquids and liquids that are slightly more viscous
- Hygienic design
- Electrolytically polished: easy to clean
- Standard engine and mechanical seal are the best guarantee for reasonable spare part prices