• Properties

    Property
    Max. flow 40 m3/h
    Differential head 27 m wc
    Max. Inlet pressure 3 bar
    Viscosity 500 cP
    Max. temperature 95 °C
    Impeller type Open 
    Max. free passage 15 mm
    Max. drive power 2.2 kW
    Speed 3000 / 3600 rpm
    Available frequency 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration Single, quench
    Available O-ring Materials EPDM, FKM
    Connections BSP fittings. flanges according to EN1092-1/02. smooth tubes 
    Surface finish Industrial, internal welds not hand polished, electropolished
    Certificates ATEX. MEI. EAC 
  • Description

    The Packo stainless steel centrifugal pumps of the NP60 series are our budget-friendly industrial pumps. They feature open cast impellers, produced using the lost wax method. This series typically achieves high efficiency, leading to reduced energy consumption in your production process. Its modular design also ensures easy maintenance.

Pump series NP60

  1. Pressed stainless steel with minimum thickness of 2 mm
  2. Investment cast open impellers
  3. Large seal cavity to guarantee liquid circulation around the seal
  4. Monobloc execution with std. IEC motors

 

Application areas

The NP60 pumps are mainly used for pure as well as slightly contaminated liquids up to a maximum viscosity of 500 cP.

They are often used as process pump for the washing of textiles, for water treatment, but also for pumping solvents, alcohols and chemicals.

Your benefits

  • High pump efficiency resulting in lower energy consumption
  • Low NPSH values: less risk on cavitation
  • Electropolished: higher resistance against corrosion
  • Easy construction and easy maintenance: less downtime
  • Easy to install
  • Solid impellers compared to low cost spot welded versions

Performance Curves

Oops, an error occurred! Code: 20241102222212a434aa1f