1. Home/
  2. Pumps/
  3. Packo/
  4. Sanitary Pump Series/
  5. MSCP

MSCP

Both the pump casing, the impellers, and the lantern piece with bearing support of this self-priming pump are made from electrolytically polished precision casting in stainless steel 316L. This results in a robust, reliable pump with a very fine surface structure.

  • Properties

    Property
    Max. flow 40 m3/h
    Differential head 75 m wc
    Max. Inlet pressure 5 bar
    Viscosity 300 cP
    Max. temperature 140 °C
    Impeller type Star impeller with straight or profiled blades 
    Max Airhandling capacity 50 l/min
    Max suction depth 8,5m
    Max. drive power 15 kW
    Speed 1500/1800 rpm
    Available frequency 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration Diverse types single mechanical seal
    Available material O-ring EPDM, FKM, FFKM
    Connections DIN11851. SMS. RJT. DIN11864-1. DIN11864-2 
    Surface finish Electropolished
    Certificates 1935/2004 EC. FDA. EAC. USP 

  • Description

    Both the pump casing, the impellers, and the lantern piece with bearing support of this self-priming pump are made from electrolytically polished precision casting in stainless steel 316L. This results in a robust, reliable pump with a very fine surface structure.

  • Downloads

Pump series MSCP

  1. Monobloc version with standard IEC motors (4-pole)
  2. Pump outlet on seal chamber. The liquid flushes the mechanical shaft seal, ensuring perfect cleaning of the seal chamber.
  3. No dead space around impeller mounting screw.
  4. When stopped, sufficient liquid remains in the pump to be able to start up again.
  5. Connection ring on the outside of the blades. Pump casing is cleaned better than with an impeller attached to the outside and yet there is no resonance of the blades as with open impellers.
  6. Impeller with profiled blades (optional) results in exceptional suction and air handling capacity and in a low

 

Application areas

This self-priming side channel pump is used in various applications where air must be pumped in against a high back pressure in the discharge line.

The MSCP has exceptional suction power and air handling capacity. This means it can completely empty the suction line, even with foaming and slightly more viscous liquids.

It is often used for unloading trucks and pumping in high silos.

Your benefits

  • Exceptional suction power and air handling capacity thanks to impeller with profiled blades (optional)
  • Sucks the suction line completely empty
  • Also suitable for foaming liquids and liquids that are slightly more viscous
  • Hygienic design
  • Electrolytically polished: easy to clean
  • Standard engine and mechanical seal are the best guarantee for reasonable spare part prices

Performance Curves

@1500 RPM