FP3
The pumps feature closed impellers with three-dimensionally profiled blades and large passages, and are constructed in 316L or duplex materials. Thanks to their crevice-free design and electropolishing as the final surface treatment, the FP3 pump series are perfectly cleanable, making them a reliable component for your production process. These impeccably cleanable pumps have stainless steel 316L pump casings made from thick, cold-rolled plate, 100% non-porous and extremely smooth.
-
Properties
Property Max. flow 320 m3/h Differential head 120 m wc Max. Inlet pressure 15 bar Viscosity 1000 cP Max. temperature 140 °C Impeller type Closed with back vanes and balancing holes Max. free passage 21 mm Max. drive power 90 kW Speed 3000 / 3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single, quench, double Available material O-ring EFDM, FKM, FEP-FKM, FFKM, Silicone Connections Hygienic fittings Surface finish Hygienic quality, internal welds hand polished + electropolished (casing 0.8 μm - impeller 3.2 μm) Certificates EHEDG. 1935/2004 EC. FDA. USP. ATEX. MEI. EAC -
Description
The pumps feature closed impellers with three-dimensionally profiled blades and large passages, and are constructed in 316L or duplex materials. Thanks to their crevice-free design and electropolishing as the final surface treatment, the FP3 pump series are perfectly cleanable, making them a reliable component for your production process. These impeccably cleanable pumps have stainless steel 316L pump casings made from thick, cold-rolled plate, 100% non-porous and extremely smooth.
- Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
- Pressed stainless steel in 2B quality plate, extremely smooth
- Large seal cavity to clean mechanical seal properly
- Monobloc execution with std. IEC motors
- Standardized mechanical seals to EN 12756 FDA approved bellow mechanical seals or sterile O-ring seals (spring not in contact with the liquid)
- Two seal diameters: - motor power ≤ 45 kW: Ø 43 mm - motor power > 45 kW: Ø 70 mm
Application areas
These perfectly cleanable process pumps are the ideal solution for filtration applications, pasteurisation, evaporating systems, yeast propagation and for CIP cleaning systems as well.
Typical applications include filtration of beer, wine andfruit juices as well as pumping yeast, whey and curd.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: perfectly cleanable
- Easy construction and easy maintenance: less downtime
- Easy to install
- 2 mechanical seal diameters for the entire range
- Robust construction
Assembly and disassembly videos
Assembly video - Configuration with bellow seal - Seal diameter 43 mm
Assembly video - Configuration with a sterile seal - Seal diameter 43 mm
Assembly video - Configuration with double seal - Seal diameter 43 mm
Assembly video - Configuration with bellow seal - Seal diameter 70 mm
Assembly video - Configuration with double seal - Seal diameter 70 mm
Disassembly video - Replacement of bellow seal - Seal diameter 43 mm
Disassembly video - replacement sterile seal diameter 43
