ICP3

These robust pumps have stainless steel 316L pump housings made from thick cold-rolled plate and have closed cast impellers in duplex materials. The solid construction and electropolished design make these pumps the reliable component for your production process.

Properties

Property
Max. flow	320 m3/h
Differential head	120 m wc
Max. Inlet pressure	15 bar
Viscosity	1000 cP
Max. temperature	140 °C
Impeller type	Closed with back vanes and balancing holes
Max. free passage	21 mm
Max. drive power	90 kW
Speed	3000 / 3600 rpm
Available frequency	50 / 60 Hz
Materials wetted parts	Stainless steel 316L or similar
Mechanical seal configuration	Single bellow, single balanced, quench, double, pressurized barrier
Available O-ring materials	EPDM, FKM, FEP-FKM, FFKM, Silicone
Connections	BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges. smooth tubes
Surface finish	Industrial finish: welds are not hand polished. Final surface treatment: electropolished
Certificates	1935/2004 EC. FDA. ATEX. MEI. EAC

Description

These robust pumps have stainless steel 316L pump housings made from thick cold-rolled plate and have closed cast impellers in duplex materials. The solid construction and electropolished design make these pumps the reliable component for your production process.
Downloads
- Packo_ICP3_US_EN_Datasheet.pdf
- Packo_Industrial_Brochure_EN.pdf

Pump series ICP3

Pressed stainless steel, pump casing thickness up to 8 mm, back plate up to 30 mm
Large seal cavity to guarantee liquid circulation around the seal
Monobloc execution with std. IEC motors

Application areas

Packo pumps of the ICP3 series are used in a wide range of industries and applications.

You can find them in just about all industries such as the vegetable industry, breweries, water treatment and the textile industry, as well as in e.g. biogas, biodiesel and bioethanol applications.

Typical liquids: blanching water, mash, wort, process water and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.