ICP2

These robust pumps have stainless steel 316L pump housings made of thick cold-rolled plate and have open, cast impellers in stainless steel 316L or duplex materials. The solid construction and electropolished design make these pumps the reliable component for your production process.

Properties

Property
Max. flow	110 m3/h
Differential head	220 m wc
Max. Inlet pressure	depending on pump type up to 20 bar
Viscosity	1000 cP
Max. temperature	140 °C
Impeller type	Open
Max. free passage	22 mm
Max. drive power	90 kW
Speed	3000 / 3600 rpm
Available frequency	50 / 60 Hz
Materials wetted parts	Stainless steel 316L or similar
Mechanical seal configuration	Single bellow, single balanced, quench, double, pressurized barrier
Available O-ring materials	EPDM, FKM, FEP-FKM, FFKM, Silicone
Connections	BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges. smooth tubes
Surface finish	Industrial, internal welds not hand polished, electropolished
Certificates	MEI. ATEX. EAC

Description

These robust pumps have stainless steel 316L pump housings made of thick cold-rolled plate and have open, cast impellers in stainless steel 316L or duplex materials. The solid construction and electropolished design make these pumps the reliable component for your production process.
Downloads
- Packo_ICP2_US_EN_Datasheet.pdf
- Packo_Industrial_Brochure_EN.pdf

Pump series ICP2

Pressed stainless steel, pump casing thickness up to 8 mm, back plate up to 20 mm
Investment cast impellers
Large seal cavity to guarantee liquid circulation around the seal
Monobloc execution with std. IEC motors

Application areas

Packo pumps of the ICP2 series are used in a wide range of industries and applications.

You find them in just about all industries such as the vegetable industry, breweries, water treatment and the textile industry, but also, for example, in applications for biogas, biodiesel and bioethanol.

Typical liquids: blanching water, mash, wort, process water, contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.