• Properties

    Property
    Max. flow 320 m3/h
    Differential head 120 m wc
    Max. Inlet pressure 15 bar
    Viscosity 1000 cP
    Max. temperature 140 °C
    Impeller type Closed with back vanes and balancing holes 
    Max. free passage 21 mm
    Max. drive power 90 kW
    Speed 3000 / 3600 rpm
    Available frequency 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration Single bellow, single balanced, quench, double, pressurized barrier
    Available O-ring materials EPDM, FKM, FEP-FKM, FFKM, Silicone
    Connections BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges. smooth tubes 
    Surface finish Industrial finish: welds are not hand polished. Final surface treatment: electropolished
    Certificates 1935/2004 EC. FDA. ATEX. MEI. EAC 
  • Description

    These robust pumps have stainless steel 316L pump housings made from thick cold-rolled plate and have closed cast impellers in duplex materials. The solid construction and electropolished design make these pumps the reliable component for your production process.

Pump series ICP3

  1. Pressed stainless steel, pump casing thickness up to 8 mm, back plate up to 30 mm
  2. Large seal cavity to guarantee liquid circulation around the seal
  3. Monobloc execution with std. IEC motors

 

Application areas

Packo pumps of the ICP3 series are used in a wide range of industries and applications.

You can find them in just about all industries such as the vegetable industry, breweries, water treatment and the textile industry, as well as in e.g. applications for biogas, biodiesel and bioethanol.

Typical liquids: blanching water, mash, wort, process water and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.

Your benefits

  • High pump efficiency resulting in low energy consumption
  • Low NPSH values, less risk of cavitation
  • Electropolished: high corrosion resistance
  • Easy & robust construction and easy maintenance: less downtime
  • Easy to install
  • Solid impellers compared to cheaper spot welded versions
  • 2 seal diameters for the whole series
  • Standard components

Performance Curves

Assembly and disassembly videos

Assembly video - Configuration with bellow seal - Seal diameter 43 mm

Assembly video - Configuration with bellow seal - Seal diameter 43 mm

Assembly video - Configuration with a sterile seal - Seal diameter 43 mm

Assembly video - Configuration with a sterile seal - Seal diameter 43 mm

Assembly video - Configuration with double seal - Seal diameter 43 mm

Assembly video - Configuration with double seal - Seal diameter 43 mm

Assembly video - Configuration with bellow seal - Seal diameter 70 mm

Assembly video - Configuration with bellow seal - Seal diameter 70 mm

Assembly video - Configuration with double seal - Seal diameter 70 mm

Assembly video - Configuration with double seal - Seal diameter 70 mm

Disassembly video - Replacement of bellow seal - Seal diameter 43 mm

Disassembly video - Replacement of bellow seal - Seal diameter 43 mm

Disassembly video - replacement sterile seal diameter 43

Disassembly video - replacement sterile seal diameter 43

Disassembly video - Replacement of bellow seal - Seal diameter 70 mm

Disassembly video - Replacement of bellow seal - Seal diameter 70 mm