FP3

The pumps are equipped with closed impellers featuring three-dimensionally profiled blades and large passages, and are constructed in 316L or duplex materials. Owing to their crevice-free design and electropolishing as the final surface treatment, the FP3 pump series are perfectly cleanable, thus becoming a reliable component in your production process. These impeccably cleanable pumps possess stainless steel 316L pump casings made from thick, cold-rolled plate, ensuring 100% non-porosity and extreme smoothness.

Properties

Property
Max. flow	320 m3/h
Differential head	120 m wc
Max. Inlet pressure	15 bar
Viscosity	1000 cP
Max. temperature	140 °C
Impeller type	Closed with back vanes and balancing holes
Max. free passage	21 mm
Max. drive power	90 kW
Speed	3000 / 3600 rpm
Available frequency	50 / 60 Hz
Materials wetted parts	Stainless steel 316L or similar
Mechanical seal configuration	Single, quench, double
Available material O-ring	EFDM, FKM, FEP-FKM, FFKM, Silicone
Connections	Hygienic fittings
Surface finish	Hygienic quality, internal welds hand polished + electropolished (casing 0.8 μm - impeller 3.2 μm)
Certificates	EHEDG. 1935/2004 EC. FDA. USP. ATEX. MEI. EAC

Description

The pumps are equipped with closed impellers featuring three-dimensionally profiled blades and large passages, and are constructed in 316L or duplex materials. Owing to their crevice-free design and electropolishing as the final surface treatment, the FP3 pump series are perfectly cleanable, thus becoming a reliable component in your production process. These impeccably cleanable pumps possess stainless steel 316L pump casings made from thick, cold-rolled plate, ensuring 100% non-porosity and extreme smoothness.
Downloads
- Packo_FP3_US_EN_Datasheet.pdf
- PACKO-FOOD-BROCHURE-EN.pdf

Pump series FP3

Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
Pressed stainless steel in 2B quality plate, extremely smooth
Large seal cavity to clean mechanical seal properly
Monobloc execution with std. IEC motors
Standardized mechanical seals to EN 12756 FDA approved bellow mechanical seals or sterile O-ring seals (spring not in contact with the liquid)
Two seal diameters: - motor power ≤ 45 kW: Ø 43 mm - motor power > 45 kW: Ø 70 mm

Application areas

These perfectly cleanable process pumps are the ideal solution for filtration applications, pasteurisation, evaporating systems, yeast propagation and for CIP cleaning systems as well.

Typical applications include filtration of beer, wine andfruit juices as well as pumping yeast, whey and curd.