CRP+

The pumps of the CRP+ series are perfectly cleanable 3A certified air handling pumps and are mainly used to pump a mixture of liquid and air. Constructed in thick cold rolled plate, 100% non-porous and extremely smooth. The pumps have open investment cast impellers, constructed in 316L or duplex materials. Thanks to its crevice-free design and electropolishing as a final surface treatment, the CRP+ pump series are perfectly cleanable, resulting in a reliable component for your production process.

Properties

Property
Max. flow	105 m3/h
Differential head	75 m wc
Max. Inlet pressure	13 bar
Viscosity	10 cP
Max. temperature	140 °C
Impeller type	Open
Max. free passage	22 mm
Max. drive power	22 kW
Speed	3000 / 3600 rpm
Available frequency	50 / 60 Hz
Materials wetted parts	Stainless steel 316L or similar
Mechanical seal configuration	Single bellow, sterile, quench, double
Available material o-ring	EPDM, FKM, FEP-FKM, FFKM or similar
Connections	3A approved sanitary fittings only
Surface finish	Hygienic quality, internal welds hand polished + electropolished (wetted parts 0.8 µm)
Certificates	3A. 1935/2004 EC. FDA. USP. ATEX. EAC

Description

The pumps of the CRP+ series are perfectly cleanable 3A certified air handling pumps and are mainly used to pump a mixture of liquid and air. Constructed in thick cold rolled plate, 100% non-porous and extremely smooth. The pumps have open investment cast impellers, constructed in 316L or duplex materials. Thanks to its crevice-free design and electropolishing as a final surface treatment, the CRP+ pump series are perfectly cleanable, resulting in a reliable component for your production process.
Downloads
- Packo_CRP-Plus_US_EN_Datasheet.pdf
- PACKO-FOOD-BROCHURE-EN.pdf

Pump series CRP+

Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
Unique air handling design with cleanable air separator
By-pass to casing taking care about air evacuation
Monobloc execution with std. IEC motors

Application areas

Thanks to its unique air handling design based on a standard centrifugal pump, the CRP+ series are particularly suitable as a CIP return pump, as well as for unloading applications.

They are used in the most demanding hygienic applications in almost all industries such as dairies, breweries, beverage industry, distilleries, etc.

In pharmaceutical and biotech industry they are mainly used for CIP return applications.