NP60
The Packo stainless steel centrifugal pumps of the NP60 series are our low-cost industrial pumps. They are equipped with open impellers (produced using the lost wax method). This series generally achieves high efficiency, resulting in reduced energy consumption for your production process. Thanks to its modular design, it also ensures easy maintenance.
-
Properties
Property Max. flow 40 m3/h Differential head 27 m wc Max. Inlet pressure 3 bar Viscosity 500 cP Max. temperature 95 °C Impeller type Open Max. free passage 15 mm Max. drive power 2.2 kW Speed 3000 / 3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single, quench Available O-ring Materials EPDM, FKM Connections BSP fittings. flanges according to EN1092-1/02. smooth tubes Surface finish Industrial, internal welds not hand polished, electropolished Certificates ATEX. MEI. EAC -
Description
The Packo stainless steel centrifugal pumps of the NP60 series are our low-cost industrial pumps. They are equipped with open impellers (produced using the lost wax method). This series generally achieves high efficiency, resulting in reduced energy consumption for your production process. Thanks to its modular design, it also ensures easy maintenance.
- Pressed stainless steel with minimum thickness of 2 mm
- Investment cast open impellers
- Large seal cavity to guarantee liquid circulation around the seal
- Monobloc execution with std. IEC motors
Application areas
The NP60 pumps are mainly used for pure as well as slightly contaminated liquids up to a maximum viscosity of 500 cP.
They are often used as process pump for the washing of textiles, for water treatment, but also for pumping solvents, alcohols and chemicals.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy construction and easy maintenance: less downtime
- Easy to install
- Solid impellers compared to low cost spot welded versions
