IML
The Packo submersible cantilever pump series IML is designed for installation in a sump or tank, with only the casing and impeller submerged. The absence of a mechanical seal and slide bearing in contact with the liquid makes these cantilever pumps maintenance-friendly and reduces downtime.These robust pumps are constructed from stainless steel 316L, with pump casings made through pressing or investment casting, and can be equipped with open, semi-open, closed, or vortex impellers. Thanks to their solid construction and electropolished design, these pumps are a dependable component in your production process.Available in NP, ICP, MCP, IFF, and MFF versions with open, semi-open, closed, or vortex impellers.
-
Properties
Property Max. flow 1000 m3/h Differential head 60 m wc Max. Inlet pressure - Viscosity 1000 cP Max. temperature 200 °C Impeller type Open. semi-open. closed or vortex Max. pump length 500 mm Max. free passage 45 mm Max. drive power 132 kW Speed 3000/3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration No seal - cantilever Available O-ring materials EPDM, FKM Connections Hygienic fittings. BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges Surface finish Industrial, welds not hand polished, electropolished Certificates 1935/2004 EC. FDA. EAC. ATEX -
Description
The Packo submersible cantilever pump series IML is designed for installation in a sump or tank, with only the casing and impeller submerged. The absence of a mechanical seal and slide bearing in contact with the liquid makes these cantilever pumps maintenance-friendly and reduces downtime.These robust pumps are constructed from stainless steel 316L, with pump casings made through pressing or investment casting, and can be equipped with open, semi-open, closed, or vortex impellers. Thanks to their solid construction and electropolished design, these pumps are a dependable component in your production process.Available in NP, ICP, MCP, IFF, and MFF versions with open, semi-open, closed, or vortex impellers.
- Use of standard IEC motors
- Tapered shaft, fully machined
- High strength column support pipe. Rigidly maintains alignment between motor and casing. Protects pump shaft.
- Cantilever design = no mechanical seals, no plain bearings. Reduced downtime and operating costs. No bottom bearing, no oil or water pipes required to lubricate these bearings.
- Renewable “labyrinth” shaft sleeve to minimize blow-back of liquid around the shaft. Additional shaft protection against abrasive liquids.
- Optional: stainless steel base plate and outlet pipe
Application areas
They are used in applications for liquids which are difficult to seal with a mechanical seal.
The Packo submersible cantilever pump series IML are used in a wide range of industries and applications such as metal finishing industry, industrial spray washers, water treatment, galvanizing and coating industry, chemical industry, etc.
They are handling degreasing, pickling & phosphatizing liquids, slurries, hot oils, process and industrial wastes, corrosive liquids, condensate, etc.
