IFF

These robust pumps have stainless steel 316L cast pump casings and closed or channel investment cast impellers constructed in duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.

Properties

Property
Max. flow	360 m3/h
Differential head	35 m wc
Max. Inlet pressure	13 bar
Max. temperature	140 °C
Certificates	EN 1935. FDA. ATEX. EAC
Max. particle size	35 mm
Viscosity	500 cP
Speed	1500 / 1800 rpm
Max. drive power	90 kW
Available frequency	50 / 60 Hz
Available frequency	BSP thread. industrial flanges acc. to EN 1092-1/01 & 02 and ANSI (optional: hygienic fittings)
Impeller type	Open. semi-open and vortex
Surface finish	Industrial finish: welds are not hand polished. Final surface treatment: electropolished
Mechanical seal configuration	Single, quench, double
Materials wetted parts	Stainless steel 316L or similar

Description

These robust pumps have stainless steel 316L cast pump casings and closed or channel investment cast impellers constructed in duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.
Downloads
- Packo_IFF_US_EN_Datasheet.pdf
- Packo_Industrial_Brochure_EN.pdf

Pump series IFF

These robust pumps have stainless steel 316L pump casings constructed in thick cold rolled plate and can be equipped with open or vortex investment cast impellers stainless steel 316L or similar.

The pumps have a large clearance between the impeller and the pump casing and as a result they can handle solids, fibres, foils and leaves without any risk of clogging. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.

Pressed stainless steel, pump casing thickness up to 8 mm, back plate up to 30 mm
Large clearance between impeller and pump casing
Large seal cavity to guarantee liquid circulation around the seal
Monobloc execution with std. IEC motors

Application areas

They are often used as process pump for contaminated water as well as for CIP cleaning systems, filtration of wine, mash, beer, whey and blanching of vegetables. Typical liquids: mash, wort, process and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.