IMO
The Packo submersible cantilever pump series IMO are suitable for handling liquids with a temperature up to 200°C. They are especially constructed to handle liquids that are difficult to seal such as paints, varnishes, galvanic coatings, hot frying oil, etc. Particularly suitable for pumping liquids that are difficult to seal such as hot frying oil up to 200° C. They are also used for pumping waste water from industrial waste such as CIP, acids, condensate, etc.
-
性能
属性 最大流量 1000 m3/h 最高自吸高度 60 m wc Max. Inlet pressure Atmospheric 粘度 1000 cP 最高温度 200 °C 叶轮类型 Open. semi-open or closed Max. free passage 45 mm 最大功率 250 kW 转速 3000 rpm 可用频率 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration No seal - cantilever Available O-ring materials FKM - EPDM - Special 连接 Industrial or hygienic Surface finish Industrial finish: welds are not hand polished. final surface treatment: electropolished 认证 1935/2004 EC. MEI. EAC -
描述
The Packo submersible cantilever pump series IMO are suitable for handling liquids with a temperature up to 200°C. They are especially constructed to handle liquids that are difficult to seal such as paints, varnishes, galvanic coatings, hot frying oil, etc. Particularly suitable for pumping liquids that are difficult to seal such as hot frying oil up to 200° C. They are also used for pumping waste water from industrial waste such as CIP, acids, condensate, etc.
泵系列 IMO
Packo 的悬臂式潜水泵 IMO 系列适用于处理温度高达 200°C 的液体。它们特别适用于处理难以密封的液体,如油漆、清漆、电镀涂层、热煎炸油等。
泵的工作长度为 500 毫米。(= 泵吸入口上方的最大液位)
MCP3IMO 泵也可安装在工作长度为 900 毫米的基座上。