IML
The Packo submersible cantilever pump series IML are designed for installation in a sump or tank, having only the casing and impeller submerged. Because the absence of a mechanical seal and slide bearing in contact with the liquid, the cantilever pumps are maintenance friendly and reduce the downtime. These robust pumps have stainless steel 316L pressed or investment cast pump casings and can be equipped with open, semi-open, closed and vortex impellers. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process. Available in NP, ICP, MCP, IFF and MFF version with open, semi-open, closed or vortex impellers. The Packo submersible cantilever pump series IML are used in a wide range of industries and applications such as metal finishing industry, industrial spray washers, water treatment, galvanizing and coating industry, chemical industry, etc.
-
性能
属性 最大流量 1000 m3/h 最高自吸高度 60 m wc Max. Inlet pressure - 粘度 1000 cP 最高温度 200 °C 叶轮类型 Open. semi-open. closed or vortex Max. pump length 500 mm Max. free passage 45 mm 最大功率 132 kW 转速 3000/3600 rpm 可用频率 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration No seal - cantilever Available O-ring materials EPDM, FKM 连接 Hygienic fittings. BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges Surface finish Industrial, welds not hand polished, electropolished 认证 1935/2004 EC. FDA. EAC. ATEX -
描述
The Packo submersible cantilever pump series IML are designed for installation in a sump or tank, having only the casing and impeller submerged. Because the absence of a mechanical seal and slide bearing in contact with the liquid, the cantilever pumps are maintenance friendly and reduce the downtime. These robust pumps have stainless steel 316L pressed or investment cast pump casings and can be equipped with open, semi-open, closed and vortex impellers. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process. Available in NP, ICP, MCP, IFF and MFF version with open, semi-open, closed or vortex impellers. The Packo submersible cantilever pump series IML are used in a wide range of industries and applications such as metal finishing industry, industrial spray washers, water treatment, galvanizing and coating industry, chemical industry, etc.
IML 系列泵
Packo IML 系列悬臂式潜水泵设计用于安装在底盘或水箱中,只有外壳和叶轮浸没在水中。由于没有机械密封和与液体接触的滑动轴承,悬臂泵便于维护,减少了停机时间。
这些坚固耐用的泵采用 316L 不锈钢冲压或熔模铸造泵壳,可配备开式、半开式、闭式和旋涡式叶轮。坚固的结构和电抛光设计使这些泵成为您生产过程中的可靠组件。
可提供 NP、ICP、MCP、IFF 和 MFF 版本,配备开式、半开式、闭式或旋涡式叶轮。
- 使用标准 IEC 电机
- 锥形轴,完全机加工
- 高强度支柱支撑管。严格保持电机与外壳之间的对齐。保护泵轴。
- 悬臂设计 = 无机械密封,无滑动轴承。减少停机时间和运行成本。无底部轴承,无需油管或水管润滑这些轴承。
- 可再生的 "迷宫式 "轴套可最大限度地减少轴周围的液体回流。提供额外的轴保护,防止磨损性液体进入。
- 可选:不锈钢底板和出水管